济南雷竞技app下载

Nowadays, residential containers are favored by many young people. The following Jinan residential container rental manufacturers will give you a detailed summary of the installation principles of residential containers, I believe this article will help you!

一、灰线放样：根据生活区平面图位置放测。

Gray line lofting: according to the location of living area plan.

1.住人集装箱各构件安装位置应符合设计要求，现场焊接部件位应准确，无假焊、漏焊。

1. Installation location of each component of residential container should meet the design requirements, and the welding parts should be accurate on site, without false welding or leak welding.

2.紧固件必须按设计要求的规定，位置安装正确并垫好垫圈，不得少装、漏装。构件间的连接螺栓必须要拧紧。

2. Fasteners must be installed correctly and gaskets must be padded properly according to the design requirements, and no less or no less filling shall be allowed. Connection bolts between components must be tightened.

3.油漆经现场焊接及运输途中底漆剥落处应重刷防锈漆一层；构件露明部位刷面漆二层，油漆不得有漏刷、脱皮、挂漆及返锈现象。

3. Paint should be repainted with rust-proof paint at the spalling place of primer during welding and transportation. Paint should not be leaked, peeled, hung and rust-back at the exposed part of component.

4.墙体

4. Wall

a、按排板图将集装箱办公室、墙面必须校正，伞墙的转角处及阳角处用角铝封口，板与板之间连接采用工字铝连接，各墙须垂直，嵌缝深度一致，整齐清洁，墙面应清洁，颜色一致，板缝齐整，打钉面上下要一致，不得有错落，必要部位采用自攻螺栓。

A. Container offices and walls must be corrected according to layout drawings. Corner aluminium seals are used at corners and sunshine corners of umbrella walls, and I-shaped aluminium joints are used between boards. The walls must be vertical, with the same depth of insertion, neat and clean, the walls should be clean, with the same color, the seams of boards should be neat, the nailing surfaces should be uniform, and there should be no dislocation. Self-tapping bolts are used in necessary parts.

b、按设计图纸标明集装箱会议室门窗位置，用切割机割出门窗洞位置，按照门窗洞位置安装窗门，窗为塑钢窗，北京raybet1租赁进行底层的吊顶。

B. Mark the position of the doors and windows of the container conference room according to the design drawings, cut out the position of the doors and windows with the cutting machine, install the windows according to the position of the doors and windows, the windows are plastic steel windows, and the bottom ceiling of the Beijing container activity room is rented.

5.门窗：门窗安装位置要合理，要让开门和开窗方便不碍手，并牢固安装，玻璃质量良好。

5. Doors and windows: The installation position of doors and windows should be reasonable, so that the opening and opening of doors and windows are convenient and unhindered, and firmly installed, with good glass quality.

6.楼面：楼板铺设应座灰，板间有裂缝不准安装使用，水泥或细石砼表面应密实压光，不允许有裂缝、脱皮和起砂等缺陷。

6. Floor: Floor should be paved with ash, cracks between slabs are not allowed to be installed and used, cement or fine stone concrete surface should be compacted and compacted, cracks, peeling and sand defects are not allowed.

7.天沟：天沟接头应接牢，接头处做好防水胶，天沟内应无积水，不得有渗漏水现象，落水管安装垂直牢固，抱箍间距1300一只。

7. Tiangou: Tiangou joint should be firmly connected, waterproof glue should be made at the joint, there should be no water accumulation in the gutter, no leakage phenomenon, downspout installation is vertical and firm, hoop spacing is 1300.

感谢您的阅读与观看，本文的精彩内容来自：济南雷竞技app下载，我们会有更多的精彩内容继续为您呈现，详情请点击：http://www.jnjgjzx.com

Thank you for reading and watching. The wonderful content of this article comes from: Jinan Resident Container Rental, we will continue to show you more wonderful content. For more details, please click: http://www.jnjgjzx.com.