济南雷竞技app下载

　　Steel structure residential activity is the most widely used temporary residential building at present. Although the first frame of the steel structure of the mobile house, its foundation is that most of the foundation is reinforced concrete structure. The hardness activity foundation of steel structure residential must require the resolution of the hardness foundation. You are willing to do special treatment, which is a very important project to lay the foundation.

　　首先要进行硬度试验时,硬度的特殊地形和基础制造移动房间有较大的差别,应该做特殊处理,钢结构移动会议室可以平滑的设备,技术人员应提前进行测量,测量完成后的基础上,下一个是基础底部浇注。

　　First of all, when carrying out the hardness test, there is a big difference between the special terrain of hardness and the mobile room of foundation manufacturing. Special treatment should be done. The mobile conference room of steel structure can be smooth equipment. The technicians should measure in advance. On the basis of the measurement, the next is the pouring at the bottom of the foundation.

　　此时的要点是要先测量水平度，浇铸结束后，应将水平度误差控制在10mm以内。底部水平必须在错误,以免影响后续操作流程,具体的标志,一般来说,基本是甜,没有钢筋,当然,在特殊地形可能无法抵抗其他条件,根据技术人员的确定更终的计划。

　　The key point at this time is to measure the levelness first. After casting, the levelness error shall be controlled within 10 mm. The bottom level must be in error to avoid affecting the subsequent operation process. The specific signs, generally speaking, are basically sweet, without reinforcement. Of course, in special terrain, it may not be able to resist other conditions, and the final plan shall be determined according to the technical personnel.

　　浇注时间,练习相同的混凝土浇注过程中,钢结构住宅活动不能切割过程中,同一根倒在5月底之前预制房屋单位应该保持丰富的时间达到混凝土的硬度要求,铸造、制造根一起去,有必要结束铸造与室内地面、水平和在相同的高度。

　　Pouring time, practice the same concrete pouring process, steel structure residential activities can not be cut in the process, the same piece of prefabricated housing unit should maintain a rich time to meet the hardness requirements of concrete before the end of May, finally casting, manufacturing root together, it is necessary to end the casting and indoor ground, level and at the same height.